The biggest disadvantage of the mold is that it grows undetected in places to which you usually pay little or no attention, such as areas beneath the floors and the and inside the walls. Despite growing in such areas, molds cannot be left unattended because they pose to be serious problems when it comes to health repercussions which arise because of it.
Let us take a look at how to prevent and remediate the growth of mold.
Mold develops because of moisture which takes place because of damp and humid conditions. Thus, the best way to prevent the development of mold is to control the humidity levels at your residence. This can be achieved by opening the windows and running the air conditioner during the warm season. In winter, however, you will need a dehumidifier whose function is to remove moisture from the air without giving a cooling effect.
Ventilation is also essential in areas which are prone to moisture such as bathrooms, kitchens and laundry rooms. In such areas, it is critical to ensure that the exhaust fan is running when doing any work be it bathing, cooking or even running the dryer.
Despite taking all these measures there are a number of places where mold can thrive despite humidity not being an issue. One of the biggest examples being front-loading washing machines. The rubber door seal of a front-loading washing machine has numerous folds where moisture can get collected which lead to the development of mold and mildew. In order to prevent this from happening, the best option is to keep the door of the washer open when it is not in use and cleaning the seal on a regular basis. The other alternative is to run a wash cycle from time to time using a mildewcide tablet.
Prevention of mold can come across as a routine activity but the truth is it is not always that simple. For instance, mold can also develop as the secondary effect of water damage. In order to minimize such a possibility, you need to be proactive in the event of any water leaks at your residence. In order to do so, you need to know the location of the main water supply of your house. This will allow you to turn it off and stop the leak from any pipes which need to be repaired or replaced. Once the leak has been plugged, mop up as much water as possible and maximize ventilation by keeping the doors and windows open.
Preventive measures are good so long as the mold has not got developed but once it starts growing, you need to call in the professionals. This is because when residents take the responsibility of remediation of mold in their own hands, they tend to commit a number of mistakes. For example, knowing that mold grows in moisture, many people try and dry out the infestation by fanning out the affected area. What the people do not know is that such an attempt does more harm than good. This is because mold is a spore and the more air is blown on it, the more the spores spread out all over the place which leads to problems much worse than before. The best recourse in such a situation is by using a dehumidifier which dries the area without disseminating the spores.
The other big mistake is the use of bleach. While bleach is a cleaner and a sanitizer, it is also toxic which leaves byproducts worse than the mold itself. To prevent this, you need to use a bleach which is mild and which consists of ten percent bleach and the remaining water. Residents need to understand that bleach only removes the surface of the mold and of the mold problem is more severe, bleach will only provide a temporary fix.
If you have mold developing at your residence, then there is no need to worry. Instead of taking the matter into your own hands, the best solution is to call the experts who will not only do the job best but will make sure that mold is removed from its very roots so that it does not reappear again.